Signmaster 44 Operation Manual - 2006
Signmaster 44 Operation Manual - 2010
Signmaster 44 Assembly Procedures
Precision Feedtable Assembly Procedures
Pre-Feed Slitter Assembly Procedures
Left/Front Parts View
Left Side (Inside) Parts View
Rear, Left Parts View
Right, Front Parts View
Additional Parts
Assembly Procedures Drive And Hot Rolls
110v Wiring Diagram
Pre-feed Slitter Engagement Diagram
Slip Ring PRS001 Replacement Assembly
Slip Ring Assembly Parts Views
Right Side Control
Right Side Control With Descriptions
Casters - Old and New Style
Sprockets
Chain and Electrical View
Safety Circuit Issues Heating
Roller Spring Pressure Settings
Potentiometer/Function Switch
Hot Roll Assembly
EP30 046.5 Rewind Clutch Assembly
EP30 080.5 Release Liner Clutch Assembly
EP30 186.4 Slitter Knife Holder
To adjust the heat controls:
To raise temperature
- Press red button once to display set point value screen
- Press red button again to raise set point value
- Hold red button to raise set pont value rapidly
- Wait five seconds for actual temperature to be displayed
To lower temperature:
- Press red button once to access set point value screen
- Press blue button to lower set point value
- Hold blue button to decrease set point rapidly
- Wait five seconds for actual temperature to be displayed
To switch from Fahrenheit to Celsius:
- Hold blue button for five seconds
- Use red button to change from degrees F to degrees C
- Wait five seconds for actual temperature to display
Ex-Stock Roller Service:
Shipped from our inventory of reconditioned and re-coated laminating rolls.
Bill as a new roller, credit back when the customers used machines rolls are returned.
It is assumed the cores will be returned are usable and re-coat able.
Repair costs would be levied if necessary.
Ship back in the same crate as your rolls where delivered and there is no cost for the crate.
If rolls/cores are not returned there will no credit issued.
For parts where price is not shown, send a e-mail for prices include part number and machine serial number.
Rubber rolls are engineered different for each machine.
They have different diameters, durometers, some have crowns, some do not.
All rollers supplied are produced to same exact specifications as when the machine was new.
Please include the Machine Serial Number below when ordering parts to confirm that the correct part is supplied.
**Prices subject to change without notice.**
- Models: PRC 083.1, PRC 084, PRS 249, PRS 249A.5, PRB 047, PRS 255A, PRS 258A, PRS 258C, EHR44 003.4B, PRB 087A, HRD44 200.5, 2044001, PRC 221, PRC 210, E850 207.6B, PRK 178, PRS 280, PRC 115, PRS 048, PRS 277, PRF 128, PRF 147, PRF 148, PRH 181, PRM 1000, PRH 180, PRH 130, PRS 017, PRC 212S, E850 207.4B, PRS 223, CD05C, H380 004.4, PRS 313, EP30 009.4, PRS 001A, EHR44 300.5, PRM1000, PRM 218D, PRM 2000, PRR 150, PRS 290, PRL 184, PRS 351, PRS 352, EHR44 035.4, EHR44 040.4, EHR44 044.4, EHR44 040.4C, PRB087A, EHR 44 003.4B, PRS 374, PRS 054, PRS001A, XL44 024.4, XL44 022.4A, EHR44 049.4A, EHR44 195.5, EP30 186.4, EHR44 195.5s, SPF EHR44, PRC 0306, EHR44 056.4, EHR44 002.5, EHR44 108.5, PRB 013, EHR44 096.5, EHR44 040.4C, EHR44 035.4, EHR44 040.4B, EHR44 108.4, EP30 135.4D, PRK 178, RHR44 042.4TA, PFT44 010.4, PFT44 006.4L & PFT44 006.4R
