HD-25 Operation Manual
HD25 & HDF15 Extra Slitter Blade Holder Option Preparation Procedures
Back Parts View
Bottom Heat Shoe Parts View
Troubleshooting Guide
Chromalox 6040 Heat Control Removal
Chromalox Heat Control Extraction Procedure
Core Adapter Ring For 2 1/4" Mandrels For 3.0" Cores
E-Stop 220V Assembly Procedures
Feed Table Assembly Parts Views
Front, Right and Left Side Parts Views
Installing Roller, Sprockets and Chains
Left Side Parts View
Motor Compartment Parts Views
Power Feed Tray Instructions
Release Liner Take-up Assembly Parts Views
Release Liner Take-Up
Right and Left Housing, Cover, and Parts Views
Right (Drive) Side Parts View
Safety Shield
Slitter Blade Installation
Sprockets and Chains
Stand Customer Assembly
Supply Roll Mandrel Assembly Parts Views
Threading Diagram
Top Heat Shoe Parts View
Top, Right and Left Side Parts Views
Troubleshooting Guide
Upper Fan Assembly Option
Wiring Diagram TUV Certified
Wiring Schematic
Casters - Old and New Style
Checking the Heat Relay
D105 004.4 Stop Collar - Core Chuck Style
Omron Heat Relay PRR 231D
Remove Bottom Heat Shoe
Roller Spring Pressure Settings
What happens when the drive motor drive working is not working.
Take off the left side panel. If there is a green light on the PC control board, check for a loose wire going to the switch. Check the 3 amp fuse mounted on board, or above. If the is no green light, check power coming to the board. If the is power going to the board, then the board is bad, replace Part number PRM 218A
** Replacement rubber roller, Part H500 040.4 It is recommended to replacement in matching pairs.
For machines starting with serial numbers HD-25-1107 and higher, select rollers, part number H500 040.4.
For machines with serial numbers HD-25-1106 or lower select roller number H500 040A.4.
Rubber Rolls & Bearings HD25
Top Front Left and Right use PRB 038 Bearing (2 each) and Roll Guide Bushings PRB 039 (2)
Bottom Front Left and Right use PRB 038 (Bearings) (2) and Roll Guide Bushings PRB 039 (2)
Top Rear Left and Right are PRB 038 Bearings and Roller Guide Bushings PRB 089 (2)
Bottom, Rear Left and Right are PRB 038 Bearing (2)
PRB 039 4 pieces
PRB 038 8 pieces
For parts where price is not shown, send a e-mail for prices include part number and machine serial number.
Rubber rolls are engineered different for each machine.
They have different diameters, durometers, some have crowns, some do not.
All rollers supplied are produced to same exact specifications as when the machine was new.
Please include the Machine Serial Number below when ordering parts to confirm that the correct part is supplied.
**Prices subject to change without notice.**
- Models: PRS 080, H800 060.4B, H800 060.5B, H800 060.4T, H800 060.5T, H800 040.4, PRT 316.1, PRR 221, H385 099.4, PRB 038, PRB 060, PRB 039, PRS 256, H500 052.4B, PRB 046, PRB 089, PRS 255, PRH 140, PRC 221, PRC 210, PRC 085, PRC 083.1, PRS 294.5, PRC 084, PRC 090, PRS 287, PRG 133.5, PRG 132, H850 054.4B, H850 053.4, H850 054.4T, 7125106, E850 207.6B, PRK 178, H850 096L, PRF 111, PRF 119, PRF-115, H500 152.4, 7125103, 7125103WOB, H380 100.4, EP30 099.4L, EP30 099.4R, H500 096.4, PRF 127, PRF 137, PRG 133.5, PRG 132, PRR 231D, H850 015.4, PRH 148, PRH 1391B, PRL 199, 7125105, H850 065.4B, H500 011.4A, H500 060.4B, H500 060.4T, PRC 0306, PRS 232, 7125104, PRB 031, H850 095.4R, H850 095.4L, PRB 046A, PRS 245A.5, PRK 171, PRK 179, H850 135.4A, PRW 336, H380 004.4, PRM 2000, PRS 260A, PRR 224, PRR 220, PRF 221, H850 098.4L, H850 098.4R, PRS 224, PRR 218, H500 205.4L, H500 205.4R, H500 040A.4, H500 040.4, HD25 H500 040.4RC, ID25 040.4, PRS 054, PRS 287, PRS 374, H500 074.5, H850 075.4L, H850 075.4R, H380 186.6, PRK 171, PRM 218D, PRC 306, PRC 211, PRS 257, PRS 256, H850 135.5A, H685 012.4, D105 004.4, PRK 184, H850 005.4L, H850 005.4R, E850 008.4L, E850 008.4R, H850 008.4, H500 001.5, 7125002, 7125001, PRS 222, H500 011.4, D105 022.4, PRK 172, D105 001.4, PRS 277, PRS 287, PRS 268, PRS 080, PRH 159, PRR 229, PRR 230, PRR 159Assy, PRS 256B, PRS 255B, 7225100, H500 152.4L, H500 152.4R & PRH 159.5, E850 207.6B, PRR 159.5, PRB 093
